SnapUp Connect

ADDITIONAL FEATURES

Standby: Enter the standby interface

Dail pad: After connecting the mobile phone Bluetooth and dialling out, you can make a call on the Smartwatch.

Contact: After the Smartwatch and the APP are successfully connected, you can add contacts to the APP. After the contacts are added successfully, the phone book of the Smartwatch will be displayed synchronously, and the Smartwatch can click the contacts in the phone book to make calls (Note: the Smartwatch needs to be connected to a mobile phone Bluetooth)

Call records: The call history of the Smartwatch can be displayed, and clicking the phone number can dial directly.

Message: It can display the content of the message push (The system above IOS12 will block the SMS reminder by default)

Sports: 1. Enter the sports mode (running, walking, cycling, and mountain climbing) selection interface, and click again to start the data monitoring of the corresponding sports mode: exercise time, distance, calories burned and heart rate data; 2. Record: record all exercise data

Pedometer: Count your step data for the day, clear the data at 00:00 in the morning, and you can view the historical steps in the APP.

Sleep monitoring: Turn on sleep detection to monitor sleep quality while sleeping

Sedentary reminder: Set the sedentary time, when the time is up, the Smartwatch will vibrate to remind you, and there will be a prompt on the interface too.

Heart rate: Put the Smartwatch close to the wrist; the best wearing position is on the wrist bone above the arm. The real-time heart rate value can be measured. The normal value for the average person is 60-100 beats/min.

Blood pressure: Attach the Smartwatch to the wrist, the best wearing position is on the wrist bone above the arm, and real-time blood pressure can be measured. Adult diastolic blood pressure: 60~80 (mmHg). Adult systolic blood pressure: 100~120 (mmHg)

Blood oxygen monitoring: The Smartwatch is close to the wrist, and the best wearing position is on the wrist bone above the arm. The real-time blood oxygen value can be measured. The normal range of the value is generally 95% to 100%.

FEATURE FUNCTIONALITY

Bluetooth camera: The phone can’t be locked, and the app interface is opened, the Smartwatch enters the Bluetooth camera, and the phone will automatically pop up the camera interface, click the band to take a photo, and the phone will take a photo and store the photo on the phone. Or open the APP, and enter Remote control selfie, the phone will pop up the camera interface, and the camera will also be taken when shaking the Smartwatch

Find phone: When the Smartwatch is connected to the mobile phone, click on the Smartwatch to find the phone, long press the magnifying glass icon, and the ringtone of the mobile phone will ring.

Bluetooth music: The Smartwatch can control the phone’s music playback

Weather: Displays current weather conditions and temperature

Stopwatch: Click on the stopwatch to start and stop timing

Alarm: You can set a custom alarm clock on the APP, and the Smartwatch will vibrate to remind you when the time up

Setting: You can turn on or off the vibration of the Smartwatch and lift the wrist to brighten the screen.

Style: You can set and change the interface style

About: Display the current Smartwatch’s MAC address, Bluetooth name and Version number.

Brightness: You can set the brightness and backlight off time

QR code: Use the mobile phone to scan the QR code to download the associated APP application and bind the smartwatch.

Reset: Reset your Smartwatch device, all the Smartwatch information is cleared

Flashlight: When the flashlight function is turned on, the screen of the Smartwatch will light up in white for a long time.

Lift the wrist to brighten the screen: After turning on the hand-lifting to turn on the screen, when wearing the Smartwatch, the Smartwatch screen will light up when you lift your wrist, and the screen will turn off when you put it down.

Language: After connecting to the APP, you can set the language on the APP side, and the language can be synchronized to the smartwatch after setting; or switch the language on the smartwatch , it will also be synchronized to the APP side.

Dial push: Enter the dial function on the APP side, you can view my dial and the local dial, and you can also push the DIY dial and the dial in the dial store to the Smartwatch.

PREPARATION BEFORE USE

• For the first time, please make sure that the Smartwatch is fully charged.
• The contacts of the charging clip connected to the power supply can be charged by aligning the contacts on the back of the Smartwatch

Note: Don’t touch the charging contacts in reverse, it will cause a short circuit of the battery

DOWNLOAD THE APP

IOS/Android Phone Users: Scan the QR code above to download and install the app

Android: Search “HryFine” through the APP store to download and install the application

IOS: Search for “HryFine” in the App store to download and install the app

PLATFORM REQUIREMENTS

Android 5.0 and above support

iOS 9.0 and above support

Bluetooth BT3.0

CONNECTION INSTRUCTIONS

• The permissions in the APP installation process are all agreed upon, and the Smartwatch and the mobile phone must be connected to the APP so that the mobile phone Bluetooth can realize all functions.
• APP connection: Turn on the APP and mobile phone Bluetooth, the APP reminds me to enable the notification, and click the confirm button. Click to add a device, search for the device name and click to connect the Smartwatch device.
• Simple solutions to common Bluetooth problems: Because the Bluetooth protocols of various mobile phone brands are not uniform; sometimes the connection between the mobile phone and the Smartwatch is unstable. You can turn off the Bluetooth of the mobile phone and reconnect it again, or restore the Smartwatch to the factory settings, such as when the Smartwatch crashes. You can press and hold the power button for 10 seconds to restart the Smartwatch.
• How to connect BT3.0 bluetooth: Enter the Bluetooth settings of the mobile phone and search for Hry3.0 binding.
• How to identify the bluetooth connection successful: If the Bluetooth icon in the upper left corner of the main menu is an oval, it means that the Bluetooth connection is successful. Use the Smartwatch to click to find the phone or enter the APP to find the Smartwatch. If there is vibration, it means that the APP connection is successful.
• If there is an incoming call or message on the Smartwatch and there is no notification reminder, you need to set the mobile phone settings – notification settings, open the corresponding application and open the notification application to receive information notifications.

COMMON PROBLEMS

Can’t find smartwatch.
Answer: Because the Bluetooth of the Smartwatch is not searched by the mobile phone, please make sure that the Smartwatch is powered and activated, and is not connected to other mobile phones. Move the Smartwatch close to the mobile phone to search again. If it still does not work, turn off the Bluetooth of the mobile phone. After 20 seconds, turn on Bluetooth and search again.

Should Bluetooth be on all the time? Will there be any data if it’s off?
Answer: Before the data is synchronized, the exercise and sleep data will remain on the Smartwatch. When the mobile phone and the Smartwatch are successfully connected via Bluetooth, the Smartwatch will automatically upload data to the mobile phone, but the data stored in the Smartwatch is limited, only about one week of Bluetooth data can be stored, and the earliest data will be automatically overwritten when the space is full to generate the latest data, so please synchronized the Smartwatch to your phone in time

Note: If you turn on the call and SMS reminder function, you need to keep the Bluetooth connected, and the alarm clock reminder supports offline.

What do you do if the Smartwatch cannot charge?
1. Please confirm whether the direction of the charging clip is correct and whether the charging clip is in good contact with the Smartwatch.
2. When the power of the Smartwatch is lower than 3.6V, there will be a period of battery pre-charging time Note: Generally, it will enter the charging state immediately after plugging in the charger. If there is no display, it will take 3-5 minutes to enter the charging state

Will wearing the Smartwatch for a long time cause harm to the human body?
Answer: The radiation of the equipment is far lower than the FCC standard of the United States, which is negligible. Long-term wearing will not cause radiation damage to the human body.

SUPPORTED LANGUAGES

English, simplified Chinese, Italian, Portuguese, Polish, Spanish, French, Greek, Persian Hungarian, Czech, Russian, Turkish, Dutch, German, Thai, Vietnamese, Indonesian, Malay, Filipino, Arabic, Hebrew, Finnish, and Ukrainian.

PLEASE PAY ATTENTION!

• Don’t wear it when bathing or swimming.
• Please connect the Smartwatch when synchronizing data.
• Use the included charging cable to charge.
• Don’t expose the Smartwatch to high moisture, or extremely high or low-temperature places for a long time.

MAINTENANCE

• Don’t scratch the sensor, protect it from damage.
• Wipe the surface of the Smartwatch with a damp cloth, and use mild soapy water to remove oil or dust
• Don’t expose the Smartwatch to environments with strong chemicals, such as gasoline, cleaning solvents, propanol, alcohol, or insect repellents. Chemicals will damage the water resistance of the Smartwatch and the surface of the case.
• Avoid strong impact and extremely high-temperature exposure to your Smartwatch.
• This product does not support wearing in the rain, washing hands, swimming, hot showers or saunas, etc., and cannot resist water vapour. The company does not provide a free warranty if the Smartwatch is damaged due to water ingress due to non-use according to the instructions.

Disclaimer : This is not a medical grade device. Please consult a doctor for medical issues.