TIPS

Please read the instruction manual carefully before using this product.

1. Please get the product fully charged for the first time using.
2. If the product is not used for a long time, please charge it in each 15 days while not using it.
3. Must use the correct charger produced by a regular manufacturer with CE/CCC certificate for charging.

PAIRING

Bluetooth Mode:

1. Turn the speaker on. Its LED indicator blinks blue until the pairing is done.
2. Activate the phone’s Bluetooth function and search for “Groove S20”. As soon as the speaker gets selected and paired by you, the connection gets indicated by a sound prompt.

Note:
• The speaker can automatically reconnect to the last paired device.
• If you are having connection troubles, then remove Groove S20 from the list of paired devices on your phone, keep the phone closer to the speaker and try pairing again.

AUX Mode:

1. You can switch to AUX mode by using the AUX cable to connect the phone and the
   speaker, and then short pressing the Power button
2. In the AUX mode, you can control the audio playback via the media device/phone

TWS

You can connect two Groove S20 and virtually forge them into one speaker for a
greater impact. For TWS connection:

1. Turn on both the speakers
2. Press and hold MFB on one of the two speakers for about 2 seconds until you hear a beep
3. After releasing MFB, it may take a few more seconds for the speakers to connect
4. Activate the phone’s Bluetooth function and search for “Groove S20” to establish pairing

SHUT DOWN

1. During use, put the left and right earphones back into the power case at the same time to automatically shut down, or press the multi-function button of any earphone five times until the red light stays on for 2S to shut down.
2. The Earbuds will automatically power off while away from the connecting device or after 5 minutes without pairing successfully.

WARNING

Please charge the speaker according to the charging norms mentioned on packaging to protect the battery

1. Do not disassemble the product
2. Do not submerge the product inside water
3. Please keep this product safe from coming in contact with any liquid
4. Don’t use/store this product in extreme temperatures
5. Please keep the product away from anything that generates heat, such as radiators, stoves, etc.
6. In order to have hearing protection and an extended speaker life, avoid listening to songs on maximum volume
7. Don’t try to dismantle/repair the product on your own

FUNCTIONS

1. Answer Incoming Calls: Short press the MFB (*Multifunction Button)
2. End Calls: Short press the MFB once to end calls
3. Reject Incoming Calls: Long press the MFB for 2 seconds
4. Redial: Double press the MFB to redial the last contacted number
5. Switch Modes : Short press the power button to select modes (Bluetooth/AUX)
6. Volume Increase : Short press the “+” button in steps for increasing the volume
7. Volume Decrease: Short press the “-“ button in steps for decreasing the volume
8. Play/Pause: Short press the MFB to play or pause the tracks
9. Previous Track: Long press the “-“ button for returning to the previous track
10. Next Track: Long press the “+” button for skipping to the next track

CHARGING

1. Groove S20 beeps once every 5 minutes when the battery is low. After three such indications, the speaker automatically turns off.
2. Utilize the provided charging cable to charge the speaker.
3. The LED indicator turns into steady red while charging; the same goes off as soon as the speaker gets fully charged.