SnapUp Musique G411

PRECAUTIONS

Please fully charge the Musique G411 Wireless Bluetooth Neckband when you use it for the first time.

The Bluetooth neckband isn’t waterproof. Pay attention to water or moisture resistance rating beforehand, to avoid improper functioning.

Please use the original battery. Do not arbitrarily change or use other batteries.
This device contains a battery, smoke or fire may be caused if it’s burned, punctured, crushed, disassem- bled or exposed to excessive heat.

In order to prolong the battery life, please charge and discharge the neckband once a week when you don’t use it for a long time.

Listening to a loud sound may damage your hearing. Please check the volume before inserting the earphone in your ear.

REMARKS

For some BT enabled devices, you have to choose “Transfer the sound through Bluetooth in the setting of the music player of the BT enable device and select “Musique G411” in the device list. The music will be transmitted to the headset instead of speakers. Please refer to the instructions of your BT enabled device’s User Manual for further information.

• Control the function of last song /next song/ Pause / Play; it needs your mobile phone to support AVRCP. Please refer to the instructions of your BT enabled device’s User Manual for further information.

• If your BT enabled device’s music player has an option to On/Off the stereo mode, then switch it ON and select “Musique G411” in the device list for better sound quality. Please refer to the instructions of your BT enabled device user manual for further information.

CARE AND MAINTAINANCE

Please read the following suggestions carefully. These will help you fulfill any warranty obligations to enjoy the product for a long time.
• Keep it dry; don’t put it in the damp place so as not to

affect the internal circuit of the product.
• Don’t put the product under the sunlight or in hot areas.

High temperature will shorten the life of electronic device, or might destroy the battery, or distort certain plastic material.

• Don’t expose the product to cold areas. It might damage the internal circuit board.

• Don’t attempt to dismantle various components of the product. It might damage the product that would lead to warranty void.

• Do take proper care in handling the product so as to prevent it from falling off on the floor.

• Don’t use harsh chemicals or detergents to clean the product.

• Don’t scrape the surface with sharp objects.
If the product doesn’t work normallv. please send it to the nearest Service Center. The staff will assist you with a solution.

BEFORE USING

A. Charge the Neckband: First Time Charging: This Head set has a built-in-rechargeable battery. It is recommended to charge the battery fully before using it for the first time.

LOW Power: The Headset will switch OFF automatically when the battery is fully drained. At this time you would require to charge the battery Headset.

B. Please use the provided Type-C cable to charge the neckband when it notices “low battery, please charge”

Charging the Headset with Travel Charger (Optional):

STEP 1: Connect the travel charger using USB cable to the charging port of the headset.

STEP 2: Plug the travel charger in the standard AC power outlet.

Charging the Headset with USB Cable:

STEP 1: Connect charging cable with charging port of the headset.

STEP 2: Insert USB charging cable into USB port of

PC/Laptop.

The red LED lights will turn on while charging, indicating the device is charging. Once the light turns off the device is charged.

BASIC OPERATIONS

A. Switching ON / OFF the Headset

Function

Switch On the Headset

Operation

Long Press Power Button

Switch Off the Headset

Long Press Power Button

Enter into pairing mode

After the headset is switched On, it will search for the last paired device. After 7 to 8 seconds it will automatically enter into pairing mode.

Remark: Please switch Off the headset manually whenever not in use to save battery.

B. Pairing the Headset with Bluetooth Enabled device

You have to pair the Bluetooth headset with a BT enabled device before using it for the first time. Please make sure your BT enabled device has a Bluetooth function. Specific pairing procedures may vary with different BT enabled devices. Please refer to your BT enabled devices User Manual for further information.

The steps are as follows:

a. Pairing with Bluetooth® enabled device:

1. Keep the headset and Bluetooth® enabled device within 1 m range.

2. Make sure that the headset is OFF.

3. Switch ON the headset until you see the Blue & Red LED glowing every second. It automatically gets into pairing mode.

4. Switch ON the Bluetooth® function of your BT enabled device and search for Bluetooth® device.

Select Musique G411 in the Bluetooth® device list. 5. If asked for a passkey, enter password or PIN No: ‘0000″, and press

Yes” or ‘Confirm”

6. After successful pairing, select “Musique G400” in the Bluetooth device list, and press “Connect”. After successful connection, the indicator light will flash every 5 seconds.

Button ControlFunctionFeaturePower ButtonSingle PressPlay/Pause musicPower ButtonDouble ClickEQ ModesPower Button2 Sec Long PressVoice AssistantPower ButtonSingle PressPick up callPower ButtonDouble PressDecline CallPower ButtonDouble PressRedialPlus ButtonSingle PressNext SongPlus ButtonDouble ClickNext to next songPlus ButtonLong PressVolume UpMinus ButtonSingle PressPrevious SongMinus ButtonDouble ClickPrevious to previous songMinus ButtonLong PressVolume down